Mobile column for light railway vehicles, 7 t, wireless via battery drive and radio communication, load support bracket not included. Load support brackets, to screw onto the lift's carriage flange at different heights, with increments of 90 mm.
The existing workshop area remains free for various use. No expensive foundation works are required. As the operation is possible at any mobile column, no separate central operation desk is needed. The battery-operated columns only require a 230V socket to charge the batteries, 4 columns on one socket.
All columns of a EHB lift set are identical. Thus the quantity of columns per lift set can be configurated freely, up to 30 columns per set.
Through radio communication and battery drive, the wireless Finkbeiner lifting systems are extremely flexible. A trip hazard is eliminated with no cables on the ground or across the track. No separate controllers. No time consuming cable connections from column to column.
The columns are easy to maneuver and position at the vehicle by one person. Time consuming cable connection of the columns is not necessary when using Finkbeiner wireless lifting systems. In addition, high voltage cable connections for operating the lifting system is eliminated because the battery-powered columns are energy self-sufficient. The hydraulic lifting columns are almost wear and maintenance free.
article no. | EHB907FDC01-H | |
lifting unit | type of columns | all columns identical |
quantity of columns, maximum | 12 | |
load support | load support | not included in delivery |
capacity per column | 7 t | |
lifting height | lifting stroke effective | 1750 mm |
speed | lifting time | 180 sec. |
lowering time (under load) | 180 sec. | |
drive | mode of drive | electro-hydraulic |
motor | DC voltage | |
motor power per column (kW) | 2.2 KW | |
power supply | type of power supply | battery-powered |
type of battery | deep cycle, maintenance-free | |
battery capacity per column | 80 Ah | |
lift cycles at full load | 20 | |
total battery voltage | 24 V | |
length of charging cable | 10 m | |
charging concept | EasyCharge | |
charging voltage | 230 V | |
frequency of power supply | 50 Hz | |
charging time | 8 h | |
communication | communication via radio, wireless | |
operation | mode of operation | operation at each column |
activation | all, individual, group | |
control | electronic | |
Softstart | X | |
regularisation | synchronisation | proportional valves, infinitely variable |
travelling device | travelling device | at each column |
travelling device at front | 2 front wheels, hydraulically acting | |
travelling device at rear | 1 hydraulic pallet jack with twin wheels | |
ground clearance at front | 75 mm | |
ground clearance at rear | 90 mm | |
load securing | load securing | hydraulic and mechanical |
lock spacing | 35 mm | |
dimensions | length | 1130 mm |
width | 1400 mm | |
height | 2255 mm | |
weight | weight per column (kgs) | 604 kg |
protection class | IP54 | |
surface treatment | type of surface treatment | powder coating |
colour | orange RAL2004 / grey RAL7015 |