Mobile lift, capacity 3500 kg, battery driven, lifting height 194 cm, symmetric swivel arms, drive-in width 2300 mm, electro-hydraulic drive.
Your workshop area stays free for most versatile use. A fixed installation is not required. Plug and play!
The portable lift FHB can be used for various types of vehicles. Cars, SUV and vans are lifted by means of standard swivel arms or optional detachable platforms. Special vehicles such as mowers, golf-carts, small tractors by means of 4 adjustable drive-on platforms.
FHB car lift models ensure optimum free access to the underside of the vehicle and free door access at any lifting height.
The car is driven into the U-shape of the lift until the front wheels touch the crossbeam. Then the 4 telescopic swivel arms are positioned underneath the vehicle from the outside to adjust the lifting pads to the car's pick-up points.
|load support||load support||4 swivel arms, symmetric|
|length of swivel arm at front, minimum (mm)||560 mm|
|length of swivel arm at front, maximum (mm)||1300 mm|
|length of swivel arm at rear, minimum (mm)||560 mm|
|length of swivel arm at rear, maximum (mm)||1300 mm|
|distance between supports, maximum||2950 mm|
|load pad Ø||120 mm|
|lifting height||lifting stroke effective||1800 mm|
|lifting height||1940 mm|
|minimum support height (mm)||120 mm|
|height adjustment of load pad||40 mm|
|speed||lifting time||40 sec.|
|lowering time (under load)||40 sec.|
|drive||mode of drive||electro-hydraulic|
|motor power (kW)||2.2 KW|
|power supply||type of power supply||battery-powered|
|type of battery||deep cycle, maintenance-free|
|lift cycles at full load||20|
|battery capacity||80 Ah|
|total battery voltage||24 V|
|length of charging cable||1 m|
|charging concept||integrated charger|
|charging voltage||230 V|
|frequency of power supply||50 Hz|
|charging time||8 h|
|operation||mode of operation||1 central control unit|
|regularisation||synchronisation||master-slave cylinder system|
|travelling device||travelling device||2 front wheels, 1 detachable wheel handle at rear|
|ground clearance at front||20 mm|
|ground clearance at rear||90 mm|
|load securing||load securing||hydraulic and mechanical|
|drive-in width||2300 mm|
|surface treatment||type of surface treatment||powder coating|
|colour||orange RAL2004 / grey RAL7015|